If you think you don’t have time to stitch a last minute gift, think again! Let me show you how to stitch six napkins in no time.
Mark the location of the corner monogram on each of the six napkins. I use the Napkin On-Point template from the Perfect Placement Kit – no math, no measuring. Just place the template on the napkin aligning the guides with the stitched hem and then insert a target sticker into the hole with the arrow pointing towards the body of the napkin. Repeat for all six napkins – you’ll finish this task in under two minutes.
Select the largest hoop available and hoop tear-away stabilizer. Since I was limited to a 5” x 7” hoop for this project, I selected a small design so I could fit three napkins in one hooping. Use one of three options for holding the napkin on the stabilizer: spray the hooped stabilizer with temporary adhesive, hoop adhesive tear-away stabilizer or use painter’s tape.
To get the most of a 5” x 7” sewing field for this technique, consider placing the first design (napkin) at the far left back of the hoop, the second design in the middle on the right and the third design at the bottom of the hoop on the left. You could audition the positions in software or on the editing screen of your machine. Here’s an example.
Position the needle over the target sticker. If your machine has a trace feature, use it to verify the needle will not stitch on the first napkin. Once you’re confident the first napkin is out of the sewing field, remove the sticker and embroider the design.
Bam -three napkins done in no time! Now repeat for a second hooping of three more napkins and your set of six is complete.