A Closer Look… On the Wrong Foot

Elizabeth and Henry started off on the wrong foot today.

Henry later apologized and professed his love for Elizabeth.

They do make a nice couple.

 

 

About the image:

The featured BERNINA foot is #40C – A Sideways motion foot!  Imagine the possibilities!

 

Here’s your assignment this week:
What foot do you have that you wish you knew how to use?  Post a comment to let us know! One comment will be chosen at random to receive a $25 shopping spree on the Designs in Machine Embroidery website!
The winner of last week assignment: 
Leave a comment below about something you’d like to create with Stipple! Baby. One random comment will be chosen to get their very own copy of Stipple! Baby for free. The winner is: Judy!
“The cards are so cute!  Would love to try them, but a baby girl’s quilt would be lovely.”Congratulations, Judy!

Related posts:

Follow Us On Facebook

75 Comments on A Closer Look… On the Wrong Foot

  1. Robin
    October 1, 2014 at 5:14 pm (5 years ago)

    The one thing I have is a chenille stitch foot. I have never made actual chenille with it. Do you use a special fabric? Or bias cut? And when you brush it to fluff it, how do you keep it from scratching the fabric you are attaching it to?

    Reply
    • judy merchant
      October 5, 2014 at 4:01 pm (5 years ago)

      I would like to use the Bernina narrow hemming foot. Tried it on sheer skirt & ended up taking it to alteration person as I just couldn’t get it to work??

      Reply
  2. Elizabeth_T
    October 1, 2014 at 5:26 pm (5 years ago)

    I’ve never been able to get my Ruffler (Bernina foot no. 86)to work properly.

    Reply
    • Belinda germain
      October 1, 2014 at 5:31 pm (5 years ago)

      When I was doing ruffling for a set of curtains, the ruffle was a double layer of fabric, I fought with it for awhile then realized the machine was ruffling only the top layer causing everything to bunch up and not work properly. I found that the ruffling foot worked better if I baste stitched the two layers together then ruffled them, worked like a charm.

      Reply
  3. Belinda germain
    October 1, 2014 at 5:28 pm (5 years ago)

    I have all the feet for the new Babylock Ovation, so far I have only used the standard foot, the binder fott and the belt loop foot (that was fun!). I still need to learn about all the others, especially the blind hem foot and the elastic foot. So excited to try these all out!

    Reply
  4. Barbara KRatz
    October 1, 2014 at 5:31 pm (5 years ago)

    I have an elastic foot I wish I new how to use.

    Reply
  5. Kristi D.
    October 1, 2014 at 7:34 pm (5 years ago)

    I have a funny looking foot for my BabyLock Ellisimo that I have no clue what it is for. That is what I would like to learn how to use. Plus all the cool stuff that I don’t even have a clue about.

    Reply
  6. Cathy
    October 1, 2014 at 7:37 pm (5 years ago)

    Would like to know how to use the blind hem foot. Would be great to be able to hem on the machine. Thanks for all your useful information.

    Reply
  7. Patty
    October 1, 2014 at 9:24 pm (5 years ago)

    #69.. The roll hem foot. I bought it thinking I could put a narrow hem on a sheer fabric but it got the best of me!

    Reply
  8. Cindy Carson
    October 1, 2014 at 9:28 pm (5 years ago)

    I have the Babylock Ellisimo too. I love the 1/4″ edge for piecing quilts, but would like to learn how to put pipping on well with the correct foot.

    Reply
  9. Terry P
    October 1, 2014 at 9:28 pm (5 years ago)

    The binding foot. Too afraid.

    Reply
  10. Cindy Carson
    October 1, 2014 at 9:29 pm (5 years ago)

    Piping! I mean piping, not pipping!

    Reply
  11. Barb Miller
    October 1, 2014 at 9:32 pm (5 years ago)

    I would like to make curtains for my granddaughters room. Or a wall hanging for my laundry room.

    Reply
  12. Patty
    October 1, 2014 at 9:33 pm (5 years ago)

    I have many problems with the ruffling foot. I can’t belive how hard it is to work with! Is there an easier way to do this?

    Reply
  13. Nancy Drake
    October 1, 2014 at 9:43 pm (5 years ago)

    I would like to learn to use the binding foot on my serger so I can do Little Dresses for Africa faster.

    Reply
    • Jane Jarvis
      October 1, 2014 at 9:50 pm (5 years ago)

      That’s the best reason for using that foot

      Reply
  14. carolyn goodworth
    October 1, 2014 at 9:48 pm (5 years ago)

    I have a new Ovation Serger and I don’t know how to use the blind hem foot. There are several others that are a little scary-looking!

    Reply
  15. Colleen Bunner
    October 1, 2014 at 9:55 pm (5 years ago)

    Binding foot

    Reply
  16. Barbara Ann
    October 1, 2014 at 10:03 pm (5 years ago)

    I would like to know how to use the ruffler foot for my Singer 221K Featherweight and ruffler foot for my Babylock serger. And if there’s a foot to make pleats, that too! (Or is that the ruffler foot?)

    Reply
  17. Barb Grant
    October 1, 2014 at 10:06 pm (5 years ago)

    Funny you mention the Bernina sideways foot. Just today I was thinking I would ask my dealer to demonstrate how it’s used and what it’s for.

    Reply
  18. Colleen Bell
    October 1, 2014 at 10:12 pm (5 years ago)

    I so much agree with Kristi D. I have an Ellisimo Gold with a funny foot and don’t have a clue how it is used. I just love embroidering so much, that I just don’t sew or investigate what is in my tool box as much as I should.

    Oh, I do love these “Closer Looks.” I even take the time to show them to my geeky adult sons when they come over. They are all impressed with the technology.

    Reply
  19. Pam
    October 1, 2014 at 10:20 pm (5 years ago)

    The roll hem foot when hemming a dress.

    Reply
  20. Gail Beam
    October 1, 2014 at 10:22 pm (5 years ago)

    I would like to learn how to use the bias binder foot, the blind hem foot, the elastic foot, and the ruffler foot. I am a foot junkie and have a lot of feet lol that I have never used. I love the walking foot, the piping foot, the roller foot, and the sequin foot.

    Reply
  21. Carolyn H
    October 1, 2014 at 10:31 pm (5 years ago)

    Would like to know how Foot 2A works. Also the ruffler. I have to do lots of samples before I can get what I want.

    Reply
  22. Cindy
    October 1, 2014 at 10:33 pm (5 years ago)

    I have the Baby Lock Ellisimo II and it came with two walking feet. How do you know which one to use. I can’t find where it says to use different ones.

    Reply
  23. Amy Anson
    October 1, 2014 at 10:33 pm (5 years ago)

    In principle, I know how the rolled hem foot works but in reality, I can’t seem to get the hang of it in order to achieve a beautiful finished edge. I would sew appreciate any helpful hints.

    Reply
  24. Beth R
    October 1, 2014 at 10:45 pm (5 years ago)

    The flat felled foot – want to do the ‘jeans’ seams, but for some reason just haven’t mastered the foot.

    Reply
  25. Donna G.
    October 1, 2014 at 11:09 pm (5 years ago)

    The Ruffler! It’s an intimidating foot!

    Reply
  26. Sharon B
    October 1, 2014 at 11:26 pm (5 years ago)

    The gathering foot. I can imagine all kinds of creative things but I would like some creative ideas.

    Reply
  27. Mary Haggenmaker
    October 1, 2014 at 11:28 pm (5 years ago)

    Been around a Looonnngg time. Pretty much have learned to use all my feet. Practice makes …maybe not perfect there is always more that can be learned.

    Reply
  28. Kristal
    October 2, 2014 at 12:22 am (5 years ago)

    The blind hem foot is something I would like to learn…eventually.
    Seems daunting right now.

    Reply
  29. Madeline Lester
    October 2, 2014 at 1:05 am (5 years ago)

    I would love to know how to judge the amount of fabric needed to use the ruffling foot. I don’t get how the ruffled or pleating works. How much fabric makes how much ruffle or pleating? It’s very confusing to use.
    Madeline

    Reply
  30. Lynn
    October 2, 2014 at 3:19 am (5 years ago)

    I have yet to master the rolled hem foot!

    Reply
  31. Shirl R
    October 2, 2014 at 5:28 am (5 years ago)

    I would like some hints on using the rolled hem foot effectively.

    Reply
  32. Julie
    October 2, 2014 at 6:01 am (5 years ago)

    I bought a commercial blindstitch hemmer online and have never dared to use it….that curved needle is too daunting!

    Reply
  33. Dale Fedor
    October 2, 2014 at 6:09 am (5 years ago)

    I can’t figure out how to put the fabric where on my ruffler foot.

    Reply
  34. karen
    October 2, 2014 at 6:48 am (5 years ago)

    I would like to learn how to get better results with the rolled hem foot.

    Reply
  35. susan james
    October 2, 2014 at 6:57 am (5 years ago)

    the narrow hemming foot. just cannot get the hang of it.

    Reply
  36. Pamela Pope
    October 2, 2014 at 7:01 am (5 years ago)

    I for sure would love to see a good video or tutorial about the 40C foot. I had it with my previous machine and a lot of templates came with it but nobody could really help me to figure it out. My attempts were not very nice looking!

    Reply
  37. Kim
    October 2, 2014 at 7:05 am (5 years ago)

    the rolled hem foot

    Reply
  38. Linda Lee
    October 2, 2014 at 7:36 am (5 years ago)

    I have trouble with the rolled hem foot on my Janome 15000 and want to better know how to use it properly and I really want to learn how to use the flower foot on my Singer One Plus. Oh – I also want to learn how to properly use a walking foot…Yikes – I think I need a foot course!

    Reply
  39. Annette Danos
    October 2, 2014 at 7:42 am (5 years ago)

    I would love to learn how to use the ruffler attachment. I sew a lot of shorts with a ruffle on the hem. This would make it so much simpler. I have bought a ruffler but can’t seem to keep a straight seam, either top or bottom is always off. This attachment is getting the better of me. There is no instructions on how to use it when you buy the attachment.

    Reply
  40. Dianna B
    October 2, 2014 at 7:44 am (5 years ago)

    I would love a video on how to work the Bernina darning and free
    motion embroidery foot #9/24. It seems so easy and then when I
    try…..not so much!

    Reply
  41. Shelor
    October 2, 2014 at 8:12 am (5 years ago)

    I have the very expensive binding attachment for my Bernina, but I do not know how to use it properly. Wish I did. Of course, I really ought to spend some time practicing! 🙂

    Reply
  42. Angie Valentine
    October 2, 2014 at 8:21 am (5 years ago)

    I would love to know how to use my elastic foot for my Juki serger

    Reply
  43. Donna Fecteau
    October 2, 2014 at 8:33 am (5 years ago)

    I would like to use my free motion foot. Have been afraid to try it.

    Reply
  44. maria elena blecha
    October 2, 2014 at 9:37 am (5 years ago)

    The roll hem foot, I start out o.k. then it starts to “chew” the fabric!! It would be sew neat to make hems on the sheer fabric with this foot!!!

    Reply
  45. Brenda Melahn
    October 2, 2014 at 11:25 am (5 years ago)

    My biggest mystery is my ruffler foot — used it once … couldn’t now if my life depended on it.

    Reply
  46. Rrrose
    October 2, 2014 at 11:48 am (5 years ago)

    My bias tape foot has me in a dither! Complicated. Frustrating. Don’t get me started.

    Reply
  47. Sharon
    October 2, 2014 at 1:12 pm (5 years ago)

    I bought a set of 30 feet from Amazon two months ago and would love to learn how to use all of them skillfully, but the two that have me most intrigued are the Ruffler and the Binding feet. I have watched YouTube videos for both, but can’t quite bring myself to try anything yet.

    Reply
  48. Frances Powell
    October 2, 2014 at 1:24 pm (5 years ago)

    I have trouble with the hemmer foot. When I try to practice, the fabric will roll under right for a short time and then it flattens out. I don’t know what I am doing wrong. I know if I could use it properly, then I could save a lot of time. Thanks.

    Reply
  49. Barbara McKenzie
    October 2, 2014 at 2:12 pm (5 years ago)

    I have given up on the rolled hem foot – I think you must need to have the “perfect” fabric to make it work. Either that, or I’m just too impatient….

    Reply
  50. Joan Luiz
    October 2, 2014 at 2:32 pm (5 years ago)

    There is a little book by Christine Phillips – “The Sewing Machine Attachment Handbook” – that has good instructions for the ruffler attachment. Clear pictures for each fabric path and how to adjust the ruffler. Lots of history of sewing machines and how to use those odd looking feet. This is where I learned how to use my ruffler. It does take practice to be able to control the fabric feeding into the ruffler.

    Reply
  51. AudieSue
    October 2, 2014 at 2:39 pm (5 years ago)

    I have a BabyLoc Imagine serger with all the feet but I am too intimidated to try them out. I would like to learn about all the feet but would settle for the elastic foot and the blind hem foot.

    Reply
  52. Dianna
    October 2, 2014 at 4:50 pm (5 years ago)

    I would like to know how to use the Bernina 830 binding foot, the ruffle, and the hemming feet. I want to make some gifts with those feet but don’t know how to use them.

    Reply
  53. Kathy
    October 2, 2014 at 7:21 pm (5 years ago)

    I bought the circular foot and would like to learn how to use it.

    Reply
  54. Karen
    October 2, 2014 at 8:29 pm (5 years ago)

    The elastic foot. I use the rolled hem foot all the time you need the right tension on the fabric. I have also found I do not sit right in front of the machine with that foot.

    Reply
  55. Alice Cornelson
    October 2, 2014 at 8:58 pm (5 years ago)

    I’d like to learn more about the sideways walking foot,however, the one that stumps me the most is the run/fell foot, Bernina #71. If I could master that bad boy, then I could rip up the legs of my jeans and embroider some neat stuff up the leg. Thanks, Alice

    Reply
  56. JudiC
    October 2, 2014 at 9:43 pm (5 years ago)

    I have a Bernina Binder foot that I keep trying & it never works for me BUT I am even more curious about how to use a “Flower Stitch” foot that I have had for several years. It is a very big & strange looking foot.

    Reply
  57. Krishna
    October 3, 2014 at 4:19 am (5 years ago)

    Hello. Great job. I did not imagine this. This is a remarkable story. Thanks!

    Reply
  58. Jacqui
    October 3, 2014 at 4:20 am (5 years ago)

    knp dagd bahas pantainya kak ?? kan d mks ad pntai losari,d mnado ad pntai bunaken…bhaski jga !!!!

    Reply
  59. Linda Epting
    October 3, 2014 at 7:35 am (5 years ago)

    My serger feet. I bought the extra feet but do not know how to use them.

    Reply
  60. Sue kirk
    October 3, 2014 at 1:48 pm (5 years ago)

    I need more instruction on my walking foot. Is it only for quilting?

    Reply
  61. LeAnne L
    October 3, 2014 at 1:50 pm (5 years ago)

    I have a binding foot I can’t figure out how to use.

    Reply
  62. Barbara
    October 3, 2014 at 3:40 pm (5 years ago)

    Gee, I wish I knew where to start! Between my sewing machine and serger, there are so many adventures afoot that I can’t begin to choose! How about the ones that came with the last update?

    Reply
  63. Mary Frances Horton
    October 3, 2014 at 4:21 pm (5 years ago)

    The Bernina website has videos on so many different feet. Also check Bernina Feet on You Tube.

    Reply
  64. beth daniels
    October 3, 2014 at 5:58 pm (5 years ago)

    I have two Janome feet that I need to know how to use. One is a 1/4″ foot to use with my quilting and I still have not learned to use it, but I will someday.

    Reply
  65. Eileen Ryan
    October 3, 2014 at 8:16 pm (5 years ago)

    My walking foot sits in it’s box. I would love to know when I should use it.

    Reply
  66. Beverly Jefferies Vance
    October 3, 2014 at 10:56 pm (5 years ago)

    The ruffler foot!

    Reply
  67. Dawn Duke
    October 4, 2014 at 1:45 am (5 years ago)

    The book by Barbara Goldkorn “Cutting Edge Serger Techniques” looks interesting, so I put in an order on DIME. Please cancel it, as I refuse to nearly double the price with the shipping. I will look for it, when and if it shows up in book stores in Canada. We do have access to Designs Magazine, so I figure the book will show up too. Thanks Dawn

    Reply
  68. Susan
    October 6, 2014 at 8:12 pm (5 years ago)

    The Bernina Spanish Hem foot

    Reply
  69. Connie Walsh
    October 7, 2014 at 3:39 pm (5 years ago)

    I would like to master the trick to using the belt loop binder on my babylock evolution. I watched a babylock representative use one at a sewing event a few years ago and it looked so easy but after I purchased it and tried it at home, I just couldn’t get it to do a good job.

    Reply
  70. Irma
    October 7, 2014 at 3:57 pm (5 years ago)

    I would like to know how to use my Side cutter ‘S’foot on my new Brother 1250 D

    Reply
  71. Doreen
    October 9, 2014 at 8:08 pm (5 years ago)

    I would like to know more about the braiding foot.

    Reply
  72. Victorina Sivret
    October 10, 2014 at 4:41 am (5 years ago)

    Valuable info. Lucky me I found your site by accident, and I’m shocked why this accident did not happened earlier! I bookmarked it.

    Reply

Leave a reply to Belinda germain Cancel reply

Your email address will not be published. Required fields are marked *

Comment *